page 1 of 5 the big deal product overview PGA-106-75+ (rohs compliant) is an advanced wideband amplifer fabricated using e-phemt technology and offers extremely high dynamic range over a broad frequency range with low noise fgure and fat gain. lead fnish is snagni. it has repeatable performance from lot to lot and is enclosed in a sot-89 package for very good thermal performance. feature advantages broad band: 0.05 to 1.5 ghz broadband covering primary catv applications. high ip3 versus dc power consumption: 37 dbm typical at 0.5 ghz the PGA-106-75+ matches industry leading ip3 performance relative to device size and power consumption. the combination of the design and e-phempt structure provides enhanced linearity over a broad frequency range as evidence in the ip3 being typically 15-18 db above the p 1db point. this feature makes this amplifer ideal for use in catv applications. high ip2 50-60 dbm suppresses second order product on wideband applications such as catv low noise figure: 3.1 db at 0.5 ghz low noise fgure performance in combination with the high output ip3 results in high dynamic range. excellent cso/ctb* cso, -56 dbc ctb, -72 dbc competitive performance at lower current and supply voltage. PGA-106-75+ key features 75 ? 0.05 to 1.5 ghz sot-89 package ? high ip3 and ip2 ? flat gain / excellent return loss ? low noise figure flat gain, high dynamic range *78 channels fat, 30 dbmv/channel at output, 6 mhz channel spacing. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 2 of 5 simplifed schematic and pin description function pin number description rf in 1 rf input pin. this pin requires the use of an external dc blocking capacitor chosen for the frequency of operation. rf-out and dc-in 3 rf output and bias pin. dc voltage is present on this pin; therefore a dc blocking capacitor is necessary for proper operation. an rf choke is needed to feed dc bias without loss of rf signal due to the bias connection, as shown in recommended ap - plication circuit, fig. 2 gnd 2,4 connections to ground. use via holes as shown in suggested layout for pcb design to reduce ground path inductance for best performance. 0.05-1.5 ghz case style: df782 PGA-106-75+ product features ? high ip3, 37 dbm typ. at 0.5 ghz ? gain, 17.4 db typ. at 0.5 ghz ? high pout, p1db 19.8 dbm typ. at 0.5 ghz ? low noise figure, 3.1 db at 0.5 ghz rev. b m151107 PGA-106-75+ th/rs/cp 150924 general description PGA-106-75+ (rohs compliant) is an advanced wideband amplifer fabricated using e-phemt* technol - ogy and offers extremely high dynamic range over a broad frequency range and with low noise fgure and fat gain. in addition, the PGA-106-75+ has excellent input and output return loss over a broad frequency range. lead fnish is snagni. it has repeatable performance from lot to lot and is enclosed in a sot-89 package for very good thermal performance. typical applications ? catv ? gpon ? moca ? dbs 75? flat gain, high dynamic range *enhanced mode pseudomorhic high electron mobility transistor. monolithic amplifer notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com
page 3 of 5 parameter ratings operating temperature (ground lead) -40c to 85c storage temperature -65c to 150c operating current at 5.0v 170 ma power dissipation 0.85 w input power (cw) +26 dbm (5 minutes) +14 dbm (continuous) dc voltage on pin 3 6 v permanent damage may occur if any of these limits are exceeded. electrical maximum ratings are not intended for continuous normal operation. absolute maximum ratings PGA-106-75+ 1. measured on mini-circuits characterization eval board tb-670+. see characterization test circuit (fig. 1) 2. output ip2 measured at sum frequency of the two tones (f meas= f1+f2). 3. junction to ground lead. 4. (current at 85c - current at -45c)/130 histogram 0 1000 2000 3000 4000 5000 6000 7000 98-102 102-106 106-110 110-114 114-118 118-122 122-126 126-130 130-134 ma electrical specifcations at 25c, 75 ? and 5.0v 1 , unless noted parameter condition (ghz) min. typ. max. units frequency range 0.05 1.5 ghz gain 0.05 17.8 db 0.5 17.4 1.0 15.5 16.9 19.5 1.2 16.7 1.5 16.1 input return loss 0.05 14.9 db 0.5 14.5 1.0 21.0 1.2 25.3 1.5 18.4 output return loss 0.05 21.2 db 0.5 16.0 1.0 15.5 1.2 14.6 1.5 12.5 reverse isolation 1.0 24.4 db output power @1 db compression 0.05 19.2 dbm 0.5 19.8 1.0 20.1 1.2 19.8 1.5 19.3 output ip3 2 0.05 37.5 dbm 0.5 37.3 1.0 36.2 1.2 36.0 1.5 35.0 output ip2 2 0.05 61.0 dbm 0.5 59.8 1.0 58.4 1.2 52.2 1.5 59.8 noise fgure 0.05 3.3 db 0.5 3.1 1.0 3.3 1.2 3.3 1.5 3.7 device operating voltage (vd) 4.8 5.0 5.2 v device operating current 116 132 ma device current variation vs. temperature 4 97 a/c device current variation vs voltage 0.05 ma/mv thermal resistance 3 76 c/w notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
page 4 of 5 PGA-106-75+ fig 1 . block diagram of test circuit used for characterization. (dut tested on mini-circuits characterization eval board tb-670+) gain, return loss, output power at 1db compression (p1 db) , output ip3 (oip3), output ip2 (oip2) and noise fgure measured using agilents n5242a pna-x microwave network analyzer. conditions: 1. gain and return loss: pin= -25dbm 2. output ip3 (oip3): two tones, spaced 1 mhz apart, 5 dbm/tone at output. 3. output ip2 (oip2): two tones, spaced 11 mhz apart, 5 dbm/tone at output. characterization test circuit recommended application circuit (tb-670+) product marking fig 2 . evaluation board includes case, connectors, and components soldered to pcb component value dut pga-10 6 -75 + bias tee mini-circuits tcbt-14+ cdc 2400 pf cb 0.1 f c1 0.5 pf c2 1.3 pf c3 1.2 pf c4 0.7 pf l1, l2, l4 7.5 nh l3 4.7 nh p106 note 1. vcc voltage: +50.2v notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
page 5 of 5 PGA-106-75+ visual inspection electrical test sam analysis refow 3 cycles, 260c soak 85c/85rh 168 hours bake at 125c, 24 hours visual inspection electrical test sam analysis start msl test flow chart esd rating human body model (hbm): class 1b (500<1000) in accordance with ansi/esd stm 5.1 - 2001 machine model (mm): class class m1 (50v) in accordance with ansi/esd stm5.2-1999 msl rating moisture sensitivity: msl1 in accordance with ipc/jedec j-std-020d performance data data table swept graphs s-parameter (s2p files) data set (.zip fle) case style df782 (sot 89) plastic package, exposed paddle lead fnish: tin-silver over nickel tape & reel f55 standard quantities available on reel 7 reels with 20, 50, 100, 200, 500 or 1k devices suggested layout for pcb design pl-379 evaluation board tb-670+ environmental ratings env08t1 additional detailed technical information additional information is available on our dash board. to access this information click here notes a. performance and quality attributes and conditions not expressly stated in this specifcation document are intended to be excluded and do not form a part of this specifcation document. b. electrical specifcations and performance data contained in this specifcation document are based on mini-circuits applicable established test performance criteria and measurement instructions. c. the parts covered by this specifcation document are subject to mini-circuits standard limited warranty and terms and conditions (collectively, standard terms); purchasers of this part are entitled to the rights and benefts contained therein. for a full statement of the standard terms and the exclusive rights and remedies thereunder, please visit mini-circuits website at www.minicircuits.com/mclstore/terms.jsp mini-circuits ? www.minicircuits.com p.o. box 350166, brooklyn, ny 11235-0003 (718) 934-4500 sales@minicircuits.com monolithic e-phemt mmic amplifer
|
